|
Group tcl – i
Your strong, reliable Partner in
Building Condition Analysis,
Documentation
and.....
|
|
tcl - i CRACKMONITOR©
Measuring devices for detecting and documenting
changes in crack width
tcl - i OPTOMETRICS DERMAPHOT
the System for documentative Macro-Photography, simple as Snapshots,
only infinitely better
tcl - i OPTOMETRICS ENDOSCOPES
High Power Endoscopes with high resolution imaging
Rigid Endoscopes up to 480 mm working depth
Flexible Endoscopes up to 2000mm working depth
tcl - i OPTOMETRICS MAGNIFYING LENSES
for analysis of Defects, Imperfections and Crack Depth
tcl - i OPTOMETRICS ILLUMINATING PROBES
for Inspection of difficult to reach nooks and crannies
tcl - i europe
Damage and Defect Dokumentation, MacroPhotographicDocumentation,Endoscopy
Reading of Crackmonitors at a Distance of up to 100 m
|
Group tcl - i
Information & SupportCentre A/CH/CZ/D/H/PL/SK/SLO
Neuduerrlas 15 D-95199 THIERSTEIN
Tel.: +49 9235 968885 Fax: +49 9235 968887
e-mail: info@rissmonitor.com· www.rissmonitor.com
|
|
tcl - i CRACKMONITOR©
|
|
Group tcl - i
|
|
As opposed to Plaster Marks, Glass Strips, or similar conventional 'Aides' the System
tcl - i CRACKMONITOR©
affords the continual monitoring of magnitude and direction of progressive building deformation. It shows heave, drop and rotational movement relative to neighbouring components as well as widening or closing of cracks and displacement, thus showing not only the actual deformation, but also indicating the location of the cause.
The installation is simple and non – intrusive and the longevity of the monitors affords continuous recording of any changes over long periods, at a fraction of the costs of other systems with similar information value.
The System tcl - i CRACKMONITOR© has been in use for over 25 years world wide in
the analytical and acute building condition analysis
the preventative and active securing of evidence
|
Accuracy of reading +/-0,2 mm (0,01 mm with Type TT 1 PLUS in combination with digital measuring tool)
|
|
recording on the protocol card supplied, or photograhically
|
|
can be removed from building without leaving any damage after completion of analysis
|
|
each tcl - i CRACKMONITOR© is supplied with protocol card (for 12 entries) and a portion of high strength 2-component adhesive
|
tcl - i CRACKMONITORS© are manufactured in a special process, using predominantly clear materials, so that they blend in with the surface they are attached to, thus reducing the risk of being vandalised. This, together with the non – intrusive method of installation is a further advantage, especially when used on historical buildings.
The tcl - i CRACK WIDTH GAUGE for a quick and accurate crack inventory already is part of the standard equipment of many experts.
|
tcl - i CRACKMONITOR© Type TT 1 Standard
for measuring deformations in one plane. Simply install across the crack to be monitored and every change in crack width is being indicated by the movement of the hairline cross over the measuring scale (40 x 20 mm). Also, the individual components of movement and their magnitude can directly be read from the scale.
Range of Measurement:
Horizontal: -20 to +20 mm
Vertical: -10 to + 10 mm
Co – efficient of thermal expansion: 7 x 10-5
Material: Acrylic – Dims.: L x B x H 148 x 30 x 6,5 mm
|
|
tcl - i CRACKMONITOR© Type TT 1 Plus
application as TT 1 Standard, but with measuring scale 50 x 20 mm and additional stainless steel inserts for measuring the resultant with our fine measuring tool to an accuracy of 0.01 mm. This model is supplied fixed in zero position (must be removed after installation).
Range of measurement:
Horizontal: -25 to +25 mm
Vertical: -10 to +10 mm
Co-efficient of thermal expansion: 7 x 10-5
Material: Acrylic – Dims.:
LxBxH 160 x 44 x 6,5 mm
|
|
|
|
|
|
|
|
|
tcl - i CRACKMONITOR© Type TT 2 Corner
To measue deformations taking place betrween components standing at an angle to each other. Infinitely adjustable from 67° to 247° approx. This model is being used in pairs in opposing installation. Function and measuring scale as Type TT 1 Standard.
Material: Acrylic
|
|
tcl - i CRACKMONITOR© Type TT 1 Adaptor
for use in connection with TT 1 Standard and TT 1 Plus to compensate for larger differences in the surface plane, as can be encounteredi. e. in natural stone masonry.
Infinitely adjustable from. 67° bis ca. 247° approx.
Material: Acrylic
|
|
|
|
|
|
|
|
|
|
tcl - i RISSMONITOR©
Type TT 3
Ground Slab/Floor Slab
For measuring heave/drop of floor slabs relative to adjoining vertical building components.Function, material and measuringscale as TT1 Standard
|
|
tcl - i CRACKMONITOR©
Type TT 4 Displacement
To measure displacement and crack width especially in retaining walls.
Measuring Range:
Displacement:
-5 bis +110 mm
Crack Width:-10 bis +50 mm
Material: PVC
The rule (red scale) is intended to take readings only, it shall not be left in the monitor inbetween readings !
|
|
tcl - i CRACKMONITOR© CRACK WIDTH GAUGE
forquick, accurate determination of crack widthsduring crack inventory. calibrated crack widthindicatorsfrom 0,1 to 1,0 mm in 0,05 mm increments, from 1,0 to 7,0 mm in 0,5 mm increments
|
|
|
|
Say GOOD BYE to the unreliable Plaster Mark and other antiquated “Aides” of similar questionable performance.
Convince yourself and your clients of the advantages of our intelligent, reliable, patented System
tcl – i CRACKMONITOR©
when next analysing a building in distress.
|
